Mag-Hytec's
heavy duty differential covers and transmission pans provide increased
lubricant and cooling capacity for hard working recreational and service
vehicles. Mag-Hytec covers and pans are cast in A356-T6 aluminum and
texture powerdcoated black with machined cooling fins. Magnetic drain
plugs trap worn gear material promoting fluid integriy. Each unit is
fitted with ARP 568 O-rings for superior sealing. All hardware is 303
stainless steel, in most applications no gasket or sealant is required,
and all Mag-Hytec parts are covered by a lifetime limited warranty.
Depend on Mag-Hytec - when you're pulling a heavy load.
Average
of double the fluid capacity.
Fluid runs
up to 45 degrees cooler.
The sending
unit fitting is 1/8 pipe THD and shipped with a stainless pipe plug.
The calibration
plug is centered on the serial number plate and approximates the stock
cover fill plug for factory fluid level.
The O-ring
is snapped into the inverted "V" groove for a positive seal
with gasket or silicone.
Plugs, cap-screws,
and washers are stainless steel in most applications.
