Looking
for Big Daddy radical Power? You found it! At least 20 engineers were
involved in designing the Fuel Stop Plate and Governor controls. The
fuel stop plate controls the fuel quantity of the Bosch P7100 fuel pump
that is the heart of the Cummins engine performance. The Governor controls
the engine response to load and the maximum engine rpm.
It only took
1 engineer to reverse design the BD Fuel Stop Plate. BD offers 6 different
ramp designs of the Fuel Stop Plate that result in 30 to 150 hp and
70 to 300 lbs of torque increase and a calibrated boost tube orifice
improves your turbo performance.
The Governor
kit (new)opens up the engine rpm. Power will control the maximum rpm
attainable. If you have power we can reach 3800 rpm. This is not an
easy install; you may want to just order an exchange pump after you
have determined this is beyond your eyesight and steady hand.
BD suggests
a 14 cm turbine housing if you are going beyond the 250-hp level. The
increased exhaust flow requires a larger turbine housing and should
have a larger exhaust system for peak performance.
We recommend
this kit be installed by one of BD’s dealers. It requires opening up
the fuel pump and precise setting of the plate to insure the proper
adjustment to prevent over fueling and damage to the engine.
To order this product, please call (225) 752-9001
