Looking for Big
Daddy radical Power? You found it! At least 20 engineers were involved in
designing the Fuel Stop Plate and Governor controls. The fuel stop plate controls
the fuel quantity of the Bosch P7100 fuel pump that is the heart of the Cummins
engine performance. The Governor controls the engine response to load and
the maximum engine rpm
It only took 1
engineer to reverse design the BD Fuel Stop Plate. BD offers 6 different ramp
designs of the Fuel Stop Plate that result in 30 to 150 hp and 70 to 300 lbs
of torque increase and a calibrated boost tube orifice improves your turbo
performance.
The Governor kit
(new)opens up the engine rpm. Power will control the maximum rpm attainable.
If you have power we can reach 3800 rpm. This is not an easy install; you
may want to just order an exchange pump after you have determined this is
beyond your eyesight and steady hand.
BD suggests a 14
cm turbine housing if you are going beyond the 250-hp level. The increased
exhaust flow requires a larger turbine housing and should have a larger exhaust
system for peak performance.
We recommend this
kit be installed by one of BD’s dealers. It requires opening up the
fuel pump and precise setting of the plate to insure the proper adjustment
to prevent over fueling and damage to the engine.
Emission testing
and certification that meets with California Air Resource Board is constantly
being worked on. We do offer products that have CARB certification and others
that are for RACE only. Please advise us of your needs.
To order this product, please call (225) 752-9001
